Table of Contents
Advertisement
Symptom
The camera does not
shoot even when
pressing the shutter
button.
I cannot print images
with PictBridge com-
pliant printers.
A "File Full" message
appears and the cam-
era cannot shoot.
28
Troubleshooting
Cause
The battery is running low.
The camera is not in Shooting
Mode.
The shutter button was not pressed
all the way down.
The internal memory or memory
card does not have any free space.
The flash is recharging.
The camera does not recognize the
memory card.
The camera is connected to the
printer when the camera is powered
off.
Number of files and/or folders may
have exceeded the system limit.
Solution
Recharge the battery.
Switch to Shooting Mode.
Press the shutter button all the way
down.
Load a new card or delete unwanted
files.
Wait until the flash mode icon, indi-
cated on the screen, stops flashing.
Format the memory card before the
initial use or before using with
another camera.
Please turn on the camera, select
[Printer] and then connect to the
printer.
Back up existing data, and then
remove some or all of these files and
folders. When you start shooting
later, the system will automatically
create folders.
Advertisement
Table of Contents
