❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical
shock to avoid electrical shock hazards.
❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable
the door lock to prevent young children being trapped inside.
The water inlet filter
" error message will blink on the control panel when water does not enter the
- If water is very hard or contains traces of lime deposit, the water inlet filter may
It is therefore a good idea to clean it from time to time.
Turn off the water tap.
Unscrew the water inlet hose.
Clean the filter using a hard bristle
Tighten up the inlet hose.