The drain pump filter
❋ The drain filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
First drain using the drain hose and then open the pump filter to
remove whatever any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before cleaning the drain pump, carrying out
emergency emptying or opening the door in an emergency.
Open the lower cover cap ( ) by
using a finger. Turn the drain plug (
to pull out the hose.
Unplug the drain plug ( ), allowing the
water to flow out. At this time use a
vessel to prevent water flowing on to the
floor. When water does not flow any
more, turn the pump filter ( ) open to
Remove out any foreign material from
the pump filter ( ).
After cleaning, turn the pump filter ( )
clockwise and insert the drain plug ( )to
the original place. close the lower cover