Install The Door Handle (On Some Models); Choose Attachment Option - Maytag MDB7759AWB3 Installation Instructions Manual

Built-up floors(Kitchen f loorheight i shigher t han
cabinet opening.) Example: Kitchen f loortiledoesnot
extend intocabinet opening. Addshims asneeded i nthe
area shown to bring thedishwasher upto34"(86.4 cm)
below thecountertop.
NOTE: Shims mustbesecurely a ttached t o floorto avoid
movement when thedishwasher is in use.
Install the Door Handle
(on some models)
Mounting
stud
j Ha nd le :
Setscrew (inside + j ++
door handle standoff)+++ _Allen wrench .........
.............................
IMPORTANT: Do not scratch the front panel during this
procedure.
Remove the door handle and hardware bag containing
the setscrews and Allen wrench from the cardboard box.
Start setscrews in handle. Place handle on mounting
studs with the setscrews facing down. Push the door
handle tightly against the door. Insert the short end of the
Allen wrench into the setscrews. Tighten the setscrews
1/4 turn past snug.
Choose Attachment Option
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Using 2 or more people, stand the dishwasher up.
Option 1, Countertop attachment:
Countertop attachment
brackets
IMPORTANT: The dishwasher must be secured to the
cabinet. There are two brackets on top of the dishwasher
that can be attached to the countertop if it is wood,
laminate or other similar surfaces. If your countertop is
marble, granite or other hard surface, the brackets may
be moved to the sides of the dishwasher.
NOTE: Do not attach the dishwasher. This will be done
later.
Option 2, Dishwasher side attachment:
To remove the brackets from the top, flatten tab at back
of brackets with pliers, and pull the brackets out of the
slots.
14