Secure Dishwasher In Cabinet Opening - Maytag MDB7759AWB3 Installation Instructions Manual

Secure Dishwasher in Cabinet Opening
Check that dishwasher is still level front to back and side
to side in cabinet opening.
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will prohibit screws from falling into
pump area when securing dishwasher to countertop.
NOTE: Do not drop screws into bottom of dishwasher.
Locate brackets on top of dishwasher and secure
dishwasher to countertop with two, #10 x 1/2"Phillips-head
screws (included). The dishwasher must be secured to
keep it from shifting when door is opened.
Check that top of door does not contact screws,
brackets, or countertop. If it does, adjust leveling legs.
Open door and check that space between dishwasher
cabinet opening and tub is equal on both sides. If
spacing is not equal, loosen bracket screws secured
and shift tub. Tighten bracket screws.
Check side attachment
plastic
button
If securing with a side attachment, check that sides of door
do not rub against the screw heads. If they do, dishwasher
must be re-centered. When dishwasher is properly centered,
replace plastic buttons.
20