Installationrequirements; Tools And Parts - Maytag MDB7759AWB3 Installation Instructions Manual

INSTALLATIONREQUIREMENTS
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
All Installations
Tools needed:
Pi ors Fiat-blade _._
screwdriver
Phillips
screwdriver
i
sAs" and 1/4" _) UL listed or CSA
nut drivers or _ approved twist-on _
hex sockets _ wire connectors* _
J
Small level
5
10" adjustable wrench _ Y8 open-end
that opens to _//'_ wrench _/_
11/8"(2.9 cm)
_Must be the proper size to connect your household
wiring to 16-gauge wiring in dishwasher
OtFh::_ is_::l items _nee_at h rowe
Parts su )lied:
2-Drain hose clamps
(1 large and ! sma!l)
ar Green
Make sure all these parts are included in the literature package.
Parts needed:
--_ ====
%,'Compr x¾, Hose Fitting
Fo[ part or kit; see local
retailer or call Whirlpool
Parts: 1,800,442,9991, Part
Other parts you may also need:
1 V2'! - -2" _ I Masking
,3811 s.0 ore) ,
Sc[ew_type
clamps !3max)j
NOTE: Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
"Electrical Requirements" section. It is recommended that
electrical connections be made by a licensed electrical installer.
In addition, for first-time installations
Tools needed:
Parts needed:
_Coppe[ tubing (3/8 " see"Electrical Requirements,, Section
O.D suggested) 0r , z i
flexible braide,4 t-or Direct Wire: For Power Supply
: at'erSu_"-I ;'ine I use UL listed or Cord: useUL
vv _p y I
CSA approved hsted power
I strain relief to supplyc0rd kit
[_t_.,_ _j_j)_) I fit % (2.2 cm) Part Number4317824
\_ hole marked for use
With dishwaSher
Additional parts supplied with certain models only:
[ BottOm SOund pad doeated I Moisture barrier tape
[in lower rack) [ J
Make sure all these parts are included in the package containing
literature.