Know Your Pressure Washer - Briggs & Stratton 2000 PSI Owner's Manual

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
High Pressure Hose
Recoil Starter
High Pressure Outlet
& Water Inlet
Air Cleaner — Dry type filter element limits the amount
of dirt and dust that gets in the engine.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F. Warm
water will discharge from pump onto ground.This
system prevents internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Fuel Tank — Fill tank with regular unleaded fuel.
High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
Downloaded from www.Manualslib.com
SpeedClean™ 2000 PSI Pressure Washer
Chemical Injection
Siphon/Filter
manuals search engine
Spray Gun
High Pressure Outlet — Connection for high pressure
hose.
Data Tag (not shown, near rear of base plate) –
Provides model and serial number of pressure washer.
Please have these readily available if calling for assistance.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high water pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Water Inlet — Connection for garden hose.
5
Air Cleaner
Primer Bulb
Fuel Tank
Pump equipped with
Automatic Cool Down System