Ec-Declaration Of Conformity - Husqvarna 535FBX Operator's Manual

Guide bar and chain combinations
The following cutting attachments are approved for the model Husqvarna 535FBX.
Guide bar
Length, inch Pitch, inch
13 0,325
15 0,325
Saw chain filing and file gauges
EC-declaration of conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500 declares that the backpack type chain saws
Husqvarna 535FBX with serial numbers dating 2009 and onwards (the year is clear stated on the rating plate, followed
by the serial number) comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN ISO 12100-2:2003, CISPR 12:2007, EN ISO 11806:2008
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates are numbered: 0404/09/2163, 01/165/003
Huskvarna 29 March, 2011
Bengt Frögelius, Development manager
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
34 – English
TECHNICAL DATA
Gauge, mm Max. nose radius
1,3 10T
1,3 10T
Saw chain
Length, drive links
Type
(no.)
Husqvarna H30 56
Husqvarna H30 64