•
CAUTION! When fitting a new chain, the chain
tension has to be checked frequently until the chain is
run-in. Check the chain tension regularly. A correctly
tensioned chain ensures good cutting performance
and long life.
Adjusting the harness and pole
saw
Adjusting the backplate height
•
Loosen the two fasteners holding the backplate.
•
Loosen the backplate from the frame on one side.
ASSEMBLY
•
Move the backplate to the desired height and fasten it.
Make sure the pin aligns with one of the holes on the
frame, see picture.
Adjusting the harness
•
Put on the harness.
•
Tighten the waist strap so that it sits securely.
•
Tighten the chest strap.
–
English
17