Husqvarna 535FBX Operator's Manual page 26

• Whenever possible position yourself so that you can
make the cut at right angles to the branch.
• Cut large branches in sections so that you have better
control over where they fall. You should also pay
attention to the fact that falling branches can bounce
in the direction of the user after hitting the ground.
• Never cut through the swelling at the root of the
branch as this will slow down healing and increase the
risk of fungal attack!
• Use the stop at the base of the cutting head to provide
support during cutting. This will help prevent the
cutting attachment from "jumping" on the branch.
• Make an initial cut on the underside of the branch
before cutting through the branch. This will prevent
26 – English
WORKING TECHNIQUES
tearing of the bark, which could lead to slow healing
and cause permanent damage to the tree. The cut
should not be deeper than 1/3 of the branch thickness
to prevent jamming. Keep the chain running while you
withdraw the cutting attachment from the branch to
prevent it jamming.
• Make sure you have a firm footing and that you can
work without being hampered by branches, stones
and trees.
WARNING! Never activate the throttle
!
without having the cutting attachment in
full view.