Ec Declaration Of Conformity - Husqvarna 120iTK4-P Operator's Manual

EC Declaration of Conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the pole pruner
Husqvarna 120iTK4-P with serial numbers dating 2021
and onwards (the year is clearly stated on the rating
plate, followed by the serial number), comply with the
requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of February 26, 2014 "relating to electromagnetic
compability" 2014/30/EU
• of June 8, 2011 "restriction of use of certain
hazardous substances" 2011/65/EU
The following standards have been applied:
EN 62841-1:2015, EN ISO 11680-1:2011, EN ISO
12100:2010, EN 55014-1:2017+A11, EN 55014-2:2015,
EN IEC 63000:2018.
TÜV Rheinland LGA Products GmbH, Tillystrasse 2,
D-90431 Nuernberg, Germany, 0197, has carried out
voluntary EC type examination in accordance with
machinery directive's (2006/42/EC) article 12, point 3b.
The certificate for EC type examination has the number:
BM 50491650 0001
Huskvarna, 2020-12-30
Pär Martinsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
26
EC Declaration of Conformity
707 - 008 - 06.04.2021