Page 1 /WD-80480F WD-10485F/WD-10495F WD-9010SJ...
Page 2: Table Of Contents
roduct Features ■ Protection against creases With the alternate rotation of the drum, creasing in the laundry is minimized. ■ More economical by Intelligent Wash System Intelligent Wash System detects the amount of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.
Page 3: Warnings
arnings READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE For your safety, the information in this manual must be followed to minimize WARNING! the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using...
Page 4: Specifications
pecifications : Front loading washing machine Name : 220-240V~, 50Hz Power supply : 600mm(W)x600mm(D)x850mm(H) Size : 67 kg Weight : On specification label Wash capacity : 2100W Max.Watt : 50 rpm Wash/Rpm : No Spin/400/800/1000 rpm Spin/Rpm  Water consumption : 51 : 0.3 - 10kgf/cm (30~1000kPa)
Page 5: Removing Transit Bolts
nstallation Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
Page 6: Installation Place Requirement
nstallation Installation place requirement Level floor : Allowable slope under entire washer is 1˚ Drain Hose Washer Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.
Page 7: Electrical Connection
nstallation ■ Electrical connection 1. Do not use an extension cord or double adapter. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. 3.
Page 8: Normal Tap Without Thread & Screw Type Inlet Hose
nstallation Normal Tap without thread & screw type inlet hose Unscrew the fixing screw to Push the connector up till the Push the water supply hose attach the tap. rubber packing is in tight contact vertically upwards so that the with the tap.
Page 9: Installation Of Drain Hose
nstallation This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside.
Page 10: Level Adjustment
• If possible install the washer in one of the corners of the room, where the floor is more stable. Insert the rubber cups to reduce vibration. You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept. Important! •...
Page 11: Care Before Washing
are before washing Before the first washing Select a cycle (COTTON 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing. Caring before washing 1.
Page 12: Adding Detergent
dding detergent ■ Adding detergent and fabric softener 1. The Dispenser Drawer • Main wash only ➔ • Pre Wash + Main Wash ➔ 2. Adding Fabric Softener • Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes.
Page 13 dding detergent ❋ Tips 3. Detergent dosage Full load : according to • The detergent should be used according to the manufacturer’s recommendation. instruction of the detergent manufacture. Part load : 3/4 of the normal amount. • If too much detergent is used, too many suds Minimum load : 1/2 of full load.
Page 16 ow to use washer (1) Button : Power (4) Button : Temp. (7) Button : Time (2) Program (5) Child Lock (8) Button : Spin (3) Button : Start / Pause (6) Button : Option 1. Cotton automatically 2. Manual Selecting selected upon power on.
Page 17: Power/Program
ow to use washer Power Program 1. Power • Press the Power button to turn power on and off • To cancel the Time Delay function, the power button should be pressed. 2. Initial Program • When the Power button is pressed, the •...
Page 18: How To Use Washer
ow to use washer Start/Pause Option 1. Start • This Start/Pause button is used to start • By pressing the Option button, all Option wash cycle or pause the wash cycle. functions may be selected. 2. Pause 1. Rinse+ • If temporary stop of wash cycle is needed, •...
Page 19: Child Lock
ow to use washer Child Lock Time If you choose to lock the buttons on the control assembly to prevent tampering this function may be selected. • Child Lock can be set by pressing the 1. Time Save Temp. button and Option button simultaneously.
Page 20: Water Temp.
ow to use washer 2. Time Dealy Water Temp. Preparing washing before starting “Time Delay” - Turn on the water tap. - Load laundry and close the door. - Place the detergent and fabric softener in • By pressing the Temp. button, the water the drawer.
Page 21: Rinse Hold
ow to use washer Spin Favorite • Favorite program is function usage memory on process washing. If you have to use this all function again, Favorite function help to easy washing process. 1. Normal Program • After selecting the spin course, the spin speed can be chosen by pressing the spin button.
Page 22: Display
• Recommended program by manufacturer. ) : WD-K1087TP 2. Self diagnosis display - Cotton : around 60 C 3 hours and 21 minutes • If the machine encounters a fault during...
Page 23: The Water Inlet Filter
aintenance ❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to avoid electrical shock hazards. ❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. The water inlet filter - "...
Page 24: The Drain Pump Filter
aintenance The drain pump filter ❋ The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your machine. CAUTION First drain using the drain hose and then open the pump filter to remove whatever any threads or objects.
Page 25: Dispenser Drawer
aintenance ■ Dispenser drawer ❋ After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
Page 26: Cleaning Your Washer
aintenance ■ Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent. Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp objects.
Page 27: Troubleshooting Guide
roubleshooting guide ❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately When the machine does not function properly or does not function at all, check the following points before you contact your service provider.
Page 28 roubleshooting guide Symptom Possible Cause Solution Washer does not start • Electrical power cord may not Make sure plug fits tightly in wall be plugged in or connection outlet. may be loose. • House fuse blown, circuit Reset circuit breaker or replace fuse. breaker tripped,or a power Do not increase fuse capacity.
Page 29 roubleshooting guide Check another tap in the house. • Water supply is not adequate in area. Fully open tap. • Water supply taps are not completely open. Straighten hose(s). • Water inlet hose(s) are kinked. Check the filter of the inlet hose. •...
Page 30 erms of Warranty What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate. • If the fault is caused by accident, neglect, misuse or Act of God. •...
Page 31 P/No.: MFL39867402...

This manual is also suitable for:

Wd-80480f Wd-10495f Wd-10485f Wd-9010sj