Toner Replenisher Function (Increasing The Image Density) - Minolta EP1083 Operator's Manual

54
2. Toner Replenisher Function
2. (Increasing the Image Density)
Meter Count
Toner
Drum Dehumidify
Original
Even if you continue making copies after the image density has become lighter,
the copier will gradually recover the normal image density. The Toner
Replenisher Mode can, however, be used to obtain the normal image density more
quickly.
Meter Count
Toner
Drum Dehumidify
NOTE
Do not turn the Power Switch OFF or open the Front or Right Door while the
copier is replenishing toner.
The copier tends to exhaust the supply of
toner rapidly when making a number of
copies from an original with dark solid areas.
As a result, the image density of the copy
will become lighter. In such a case, you can
use the Toner Replenisher function to regain
the normal image density quickly.
1142O152CA
1142O152CA
Copy
Press the Auxiliary Toner
Replenishing Key.
This causes the copier to initiate toner
replenishing, which lasts for 90
seconds at maximum.
1142O118CA
1142O118CA
Copy Made After
Toner
Replenishing
1142O148CB