Salter Brecknell PS 150 Operation Manual

Salter Brecknell PS 150 Operation Manual

150lb/400lb digital receiving scale

Advertisement

Quick Links

MODEL PS 150
PS 400
DIGITAL RECEIVING SCALE
Operation Manual
Rev B
Salter Brecknell Weighing Products
1000 Armstrong Drive
Fairmont, MN 56031
Phone : 507-238-8702
Fax : 507-238-8271
email : sales@salterbrecknell.com
web :
http://www.salterbrecknell.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS 150 and is the answer not in the manual?

Questions and answers

Summary of Contents for Salter Brecknell PS 150

  • Page 1 MODEL PS 150 PS 400 DIGITAL RECEIVING SCALE Operation Manual Rev B Salter Brecknell Weighing Products 1000 Armstrong Drive Fairmont, MN 56031 Phone : 507-238-8702 Fax : 507-238-8271 email : sales@salterbrecknell.com web : http://www.salterbrecknell.com...
  • Page 2: Fcc Compliance Statement

    INTRODUCTION TABLE OF CONTENTS The Model PS150 is a 150lb Digital Receiving Scale. The Description of Parts ………………………… Model PS400 is a 400lb Digital Receiving Scale. Both Main Features ………………………………. units can be powered by battery or AC adapter (included). The scale is equipped with a movable display that can be Before You Begin …..……...……………..
  • Page 3: Description Of Parts

    Congratulations on your purchase of the Digital Before You Begin Receiving Scale. Your Digital Receiving Scale is an example of superior design and Remove scale from its box along with craftsmanship. In order to optimize its function, control panel and the 120V Adapter. be sure to read this instruction manual carefully If using the 120V Adapter, plug one end into before use.
  • Page 4: Tare Operation

    Mounting the Unit General Operation Mount bracket to wall using (2) screws that POWER ON are appropriate anchors for the surface To turn the scale on, press the button marked being mounted to. “ON”. The display will first show “ ”...
  • Page 5: Weight Hold

    General Operation WEIGHT HOLD To activate weight the hold feature. 1. Press and hold the TARE/HOLD button for 3 seconds. The display shows “H_ on”. Weigh Hold is now active, until turned off or the scale goes to sleep. 2. Place a package on the scale, allow the scale weight to become stable.

Table of Contents