Advertisement
Declaration of Conformity
Manufacturer
Type
Corresponds to the requirements of the following EC directives
Electro Magnetic Compatibility Directive
Low Voltage Directive
The application harmonised standards are:
A copy of the original signed declaration for this instrument is available
from the below UK address:
Electromagnetic Compatibility Statement for North America
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet different from that to which the receiver is
connected.
Consult the dealer or an experienced radio / TV technician for help
Salter Brecknell Weighing
Products USA
1000 Armstrong Drive,
Fairmont, MN56031
Toll Free: 800-637-0529
Phone:
507-238-8702
Fax:
507-238-8271
Email: sales@salterbrecknell.com
www.salterbrecknell.com
IN-0787 3014H
Salter Brecknell
MS-20
EMC 89/336/EEC
LVD 73/23/EEC
EN60950,
EN50081-1
EN50082-1
.
Salter Brecknell Weighing
UK & Europe
PO box 9533, Smethwick,
West Midlands, B66 2TE
United Kingdom
Tel: +44 (0) 870 444 6132
Fax: +44 (0) 870 010 2241
Email: sales @salterbrecknell.co.uk
USER'S MANUAL
Model MS-20
Advertisement
Table of Contents
Related Manuals for Salter Brecknell MS-20
Summary of Contents for Salter Brecknell MS-20
-
Page 1: Declaration Of Conformity
Increase the separation between the equipment and the receiver. Connect the equipment to an outlet different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help Salter Brecknell Weighing Salter Brecknell Weighing Model MS-20 Products USA UK &... - Page 2 9) Display will show “CAL” and then “20.00 kg” for KG mode or “40:00 lb” for LB mode. 10) Remove the weight from the scale and the calibration is finished. POWER SUPPLY ERROR MESSAGES The MS-20 uses 9V alkaline battery or 9V 100mA AC adapter. CAUTION: always connect the AC 1. Low Battery adapter to the MS-20 before connecting to the mains power supply.
Need help?
Do you have a question about the MS-20 and is the answer not in the manual?
Questions and answers