Scanning - Brookstone i-Convert User Manual

scannIng

1 . With a microSD card inserted into the Scanner, turn the Scanner on by sliding
the POWER switch .
2 . Hold the document you wish to scan securely on a flat surface .
3 . Place the Scanner flat against the document, scanning screen side down,
making sure the material you want to scan is between the SCAN GUIDES .
4 . Press the SCAN button once . The green SCAN LED INDICATOR light will
illuminate to show the Scanner is scanning .
5 . Roll the Scanner over the document you wish to scan slowly and evenly .
This will allow you to get the best quality scan possible .
6 . When you reach the end of the document, press the SCAN button again
to stop scanning .
7 . The COUNTING INDICATOR on the LCD screen will tell you the number
of saved scans you have completed .
8