chaRgIng The scanneR
The BATTERY INDICATOR on the LCD screen will show if the batteries need
to be charged .
In power-off mode, connect your Scanner to your computer with the included
USB cable to charge the battery .
foRmaTTIng YoUR microsD caRD
Important: the microSD card must be formatted before scanning.
Note: all content on the microSD card will be erased during formatting.
1 .
With the Scanner off, insert a microSD card (not included) into the
microSD CARD SLOT on the Scanner until it has clicked into place .
Note: Do not force the microSD card into place. Forcing the card may
damage the microSD card or the Scanner. See the diagram on the Scanner
to insert the microSD card correctly.
2 . Turn the Scanner on by sliding the POWER switch .
3 . Press the FORMAT button with a thin, blunt object, such as a paperclip
or pencil tip, once . An "F" will show on the LCD screen .
4 . Press the SCAN button once to begin formatting the microSD card .
5 . The microSD CARD INDICATOR will blink until the formatting process
is complete .
4