Glass Fiber Yarn Filling Of Main Silencer; Removing Main Silencer; Installing The Main Silencer; Removing The Air Filter Box Lid - KTM 400 EXC EU 2010 Owner's Manual

Table of Contents

Advertisement

MAINTENANCE WORK ON CHASSIS AND ENGINE

Glass fiber yarn filling of main silencer

9.88
The main silencer is filled with glass fiber yarn.
Over a period, the fibers of the insulating material vanish into the air, and the silencer "burns out".
Not only is the noise level higher, the performance characteristic changes.

Removing main silencer

9.89
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
Allow the exhaust system to cool down. Do not touch hot components.

Installing the main silencer

9.90

Removing the air filter box lid

9.91

Installing the air filter box lid

9.92
Disconnect spring
Remove screws
800020-10
Mount the main silencer. Mount and tighten screws
Guideline
Remaining screws, chassis
Reconnect spring
800020-11
Pull off the air filter box lid in area
800021-10
Insert the air filter box lid into the rear area
800021-11
.
and take off main silencer.
M6
.
to the side and remove to the front.
.
10 Nm (7.4 lbf ft)
and clip it into the front area
74
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents