Ordering Information; Workstation Software - Tektronix 540 User Manual

ORDERING INFORMATION

Phaser 540 Plus Color Printer
Includes power cord; installation instructions; user
manual; and drivers on diskette with an instruction
manual. (110 Volt) Product order number 4676
(220 Volt) Product order number 4676A
Phaser 540 Plus Accessories Kit
Includes color imaging unit, corona unit, fuser, and
four toner cartridges; 250-sheet capacity input tray
for paper; output tray and media sampler.
(110 Volt, A-size media) Order 4676FS1
(110 Volt, A4-size media) Order 4676FS1 Option 01
(220 Volt, A-size media) Order 4676FS2
(220 Volt, A4-size media) Order 4676FS2 Option 01
PHASER 540 PLUS OPTIONS
Input Trays
Paper trays hold 250 sheets of paper.
Letter-size Paper:
A4-size Paper:
Legal-size Paper:
Transparencies trays hold 100 transparencies.
Letter-size Transparencies:
A4-size Transparencies:
Lower Tray Assembly
Includes two additional input trays, one with capacity
for 250 sheets of paper, and one with capacity for
100 transparencies.
Letter-size: Order 4676FTA
A4-size: Order 4676FTA Option 01
Add 16 Mbytes of RAM
(For a total of 36 Mbytes) Required for continuous-
tone printing at 600 x 600 dpi resolution, for 600 dpi
printing on Legal-size paper, and optimized
throughput.
Order Option 16
Add 32 Mbytes of RAM
(For a total of 52 Mbytes) Provides the most efficient
memory configuration for maximum throughput in
the most demanding printing applications and
supports continuous-tone printing at 600 x 600 dpi
on Legal-size paper.
Order Option 32
PhaserShare Ethernet Card
Internal Ethernet interface with support for Novell
NetWare and EtherTalk protocols.
Order Option P1
Tektronix Phaser 540 Plus Data Sheet, HAL document number 1304, 6/95, Page 5 of 6
Order 436-0282-00
Order 436-0283-00
Order 436-0314-00
Order 436-0284-00
Order 436-0285-00
TCP/IP Protocols
Adds TCP/IP protocol support to Ethernet or Token
Ring interfaces. (Requires Option P1 or P4.)
Order Option P2
PhaserShare LocalTalk/Serial Card
Internal network interface for LocalTalk/AppleTalk
and RS-232 Serial.
Order Option P3
PhaserShare Token Ring Card
Internal Token Ring interface with support for Novell
NetWare and TokenTalk protocols.
Order Option P4
The Copystation
enables you to
make color
copies on the
Phaser 540 Plus.
Phaser Copystation
Includes SCSI cable; power cord; and user manual.
Adds the ability to make color or black-and-white
copies from any original on your Phaser 540 Plus.
Product order number 4540
Parallel/Centronics Cable
Connects the printer's parallel port to a PC or
workstation parallel port. Order 012-1468-00
Parallel/Centronics Adapter
Adapts a low-density Centronics parallel cable
connector to the printer's high-density Centronics
parallel connector. Order 013-0299-00

WORKSTATION SOFTWARE

Provides fast, raster image printing with an easy-to-
use, graphical user interface for control of printer
features.
™
PhaserPrint Software
Supports SUN (Solaris 1.x and 2.x) SGI, HP 9000,
IBM RS/6000,and DEC (ULTRIX and Alpha OSF/I).
Order 4690F20
EasyCopy/X Software
DEC OpenVMS AXP. Order 4690F27
DEC OpenVMS VAX. Order 4690F29
PhaserSym Software
VMS Print Symbiont. Order 4690F41