Advertisement
gEttiNg StartED
BaSE StatioN rEgiStratioN
Put the base station in registration mode.
> SEttiNgS > DECt >
Select
rEgiStEr.
Select a base (1–4).
Enter the base station's PIn code.
The default code is 0000 for the Konftel
DECT base station.
The conference telephone will now search for
a base station. The base station has to be in
registration mode. If registration was successful,
the word SuCCESS will appear in the display.
The conference phone is now ready to use
mini uSB port for
pC connection
uSiNg a ComputEr
Connect the Konftel 300Wx to a compu-
ter using the USB cable provided.
Check that Konftel 300Wx uSB audio is
set as the sound device in the computer's
settings.
making voip calls
Make the call (or answer an incoming
call) using the computer's VoIP software,
for example a web conference software,
Microsoft lync
or Skype
®
uSiNg a moBiLE pHoNE
Connect a mobile phone using an acces-
sory cable.
Press the
key. Select moBiLE and
press oK to confirm.
making mobile calls
Press
to activate the Konftel 300Wx.
Connect the call with the mobile phone.
.
®
Advertisement
