Kenmore 66513966K014 Installation Instructions Manual page 15

2.
3.
4.
5°
Pull direct wire through hole in terminal box.
Helpful Tip:
• Select the proper size twist-on
connectors to connect your household
wiring to 16-gauge dishwasher wiring. .......
• Insert wire ends into twist-on connector.
Do not pre-twist bare wire.
• Twist connector.
• Gently tug on wires to be sure both are secured.
Connect the wires as follows using twist-on connectors sized to
connect direct wire to 16-gauge dishwasher wire:
Power supply wire: Terminal box wire:
white--white
black--black
ground wire_e-_green ground connector
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to foflow these instructions can result in
death, fire, or electrical shock.
Form bare ground wire into a U-shaped hook. Wrap ground
wire hook clockwise around ground connector and under the
washer.
Securely tighten ground connector.
Ground wire Washer
Ground
connector
Option 2, Power supply cord method
1. Route the power supply cord so that it does not touch
dishwasher motors or lower part of dishwasher tub.
2. Pull the direct wire through hole in terminal box.
Helpful Tip:
• Select the proper size twist-on
connectors to connect your household
wiring to 16-gauge dishwasher wiring. _ _,F',
• Insert wire ends into UL Listed/CSA ,.,
Approved twist-on connector. Do not
pre-twist bare wire.
• Twist connector.
• Gently tug on wires to be sure both are
secured.
3. Connect the wires as follows using twist-on connectors sized to
connect power supply cord to 16-gauge dishwasher wire:
Power supply wire: Terminal box wire:
white--white
black--b Jack
ground wire--green ground connector
Electrical Shock Hazard
Electricafly ground dishwasher,
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord,
Failure to follow these instructions can result in
death, fire, or electrical shock.
6.
Ground wire
Tighten clamp connector or
conduit connector screws.
Reinstall terminal box cover
with wires inside terminal box.
The cover must be outside the box on
the left side.
8. Make sure no wires are pinched by
cove_
....... i
4. Form bare ground wire into a U-shaped hook. Wrap ground
wire hook clockwise around ground connector and under the
washer.
5. Securely tighten ground connector.
Ground wire Washer
Ground
connector
6.
Ground wire
Tighten clamp connector or conduit
connector screws.
ScrewL__
__ ....
15