Table of Contents
Advertisement
Adjusting the ringer volume
To adjust the Ringer Volume while the set is ringing:
Press
or
.
!
Adjusting the handset receiver volume
To adjust the Handset Receiver Volume when you are using the handset:
Press
or
.
!
Adjusting the display contrast
To adjust the contrast level of the display screen while the phone is not in use:
Press
or
.
!
Programming the Feature Keys
Programming the feature keys on your 5207 IP phone is done either directly on your phone using the
PROGRAM key or on your computer using the Desktop Tool.
For more information on using the Desktop Tool, please contact your System Administrator.
Programming a Personal Key from your Phone
Unmarked keys in the image below can be programmed with both features and Speed Dials. Keys
marked with an X be programmed; black keys can be programmed with features only. It is also
possible to program Speed Dials to the dialpad keys.
To program a feature under a programmable key:
Note: If the key you want to program already has a feature assigned to it, you must clear the feature
from the key before assigning it another.
1. Press the PROGRAM key.
2. Press the programmable key that is to be programmed.
3. Dial the code for the feature (see Feature Codes).
4. Dial a parameter if required.
5. Press the PROGRAM key to signify the end of programming.
-3-
Advertisement
Table of Contents
