Minolta Minoltafax 1300 User Manual page 12

Table of Contents

Advertisement

operation. It is therefore strongly recommended that the facsimile is set
to use DTMF signalling for access to public or private emergency
services if it is used with a hand-set. DTMF signalling also provides
faster call set up.
7
Ringer Equivalent Number (REN) for the facsimile is 1.
The REN relates to the performance of the facsimile when used in
parallel with other items of terminal equipment. The REN is a customer
guide indicating approximately the maximum number of equipment that
should be connected in parallel simultaneously to the same line. To
determine the maximum number of items that can be connected
simultaneously to an exclusive line please add the REN values of each
item connected to the exclusive line. The sum should not exceed the
maximum REN value of 4. For the purposes of this calculation, the
REN of terminal equipment rented or brought from BT plc. should be
assumed to be a REN of 1.0 unless otherwise specified.
8
When other telephone apparatus is connected in parallel with the
facsimile, it must be set on Tone dialling (DTMF) mode only.
9
When connecting a telephone onto the same line or PBX extension as
this facsimile, the serial socket on the LJU unit (on the unit cord) must
be used.
10 Please be advised that should another telephone device be used
connected to the PSTN via the serial socket on the LJU unit, then
problems may be experienced in the following ways:
(i) Difficulty making calls.
(ii) Problems in telephone conversation sometimes experienced by
both parties. Should difficulties as described above be experienced,
then the supplier of the facsimile should be contacted for assistance
and the network operator.
11 The facsimile is not suitable as an extension to a pay phone or as a
1 + 1 carrier system.
12 On a private exchange (PABX) extension, insert a pause or pauses in
the autodial sequence to allow your PABX unit time to connect with the
public service telephone network (an outside line) before dialling
continues. For example, you may require a sequence of 9 "PAUSE"
0908 214315 to transmit a fax message to our Keynes Office. To insert
pause, press the "PAUSE" key. One key operation causes a pause of
4 seconds in the dialling sequence.
Minoltafax 1300
G
ENERAL
5

Advertisement

Table of Contents
loading

Table of Contents