GreenWorks 26032 Owner's Manual page 13

ASSEMBLY INSTRUCTIONS
ASSEMBLING THE DIRECTIONAL CHUTE ARM TO DIRECTIONAL CHUTE
PINION (See Figure 5)
• Align the holes (1) on the directional chute arm (2) with the holes on the lower directional
chute arm (3). Insert the hitch pin (4). (Fig. 5.1)
ASSEMBLING THE DISCHARGE DIRECTIONAL ARM CONTROL TO THE CENTER
HANDLE (See Figure 5)
• Attach the directional chute arm (5) to the center handle (6) using a washer (7) and a locknut (8).
(Fig. 5.2)
Fig. 5
Fig. 5.1
1
2
4
3
13
5
6
7
8
Fig. 5.2