Permobil M400 Owner's Manual page 55

Owner´s Manual Permobil M300
R-Net control panel LED
Charger Socket
This socket should only be used for charging or locking the wheelchair. Do not
connect any type of programming cable into this socket This socket should not
be used as a power supply for any other electrical device. Connection of other
electrical devices may damage the control system or affect the E.M.C. perfor-
mance of the wheelchair.).
m WARNING!
The wheelchair's warranty will be voided if any device other than a battery charger supplied with the
wheelchair, or the lock key is connected into the control panels charger socket.
Charging socket
57
Design and Function (R-net)
Charging plug
Connect the
charging plug
with the guide
upwards.