Permobil M400 Owner's Manual page 29

Owner´s Manual Permobil M400
VR2 Control Panel
Charger/Programming Socket
This socket should only be used for charging the wheelchair. A VR2 compatible
Hand-held or PC Programmer can be connected to this socket, in order to make
changes to the wheelchair's driving characteristics. This socket should not be
used as a power supply for any other electrical device. Connection of other elec-
trical devices may damage the control system or affect the E.M.C. performance
of the wheelchair.
m WARNING!
The wheelchair's warranty will be voided if any device other than a battery charger supplied with the
wheelchair, or the lock key is connected into the control panels charger socket.
Charging socket
Charging plug
31
Design and Function (VR2)
Connect he
charging plug
with the guide
upwards.