Permobil M400 Owner's Manual page 31

Owner´s Manual Permobil M400
VR2 Control Panel
Power Switch, On/Off
Button to power up and power down the wheelchair. This button must be
pressed for the chair to operate.
m WARNING!
Do not use the Power Switch Button to stop the wheelchair unless there is an emergency. If you do,
you may get thrown out of the chair or shorten the life of the wheelchair drive components.
Warning Horn
Press the button to sound the horn and attract attention.
Hazard Warning Button and LED*)
This button activates/deactivates the wheelchairs hazards lights. this function is
used when the wheelchair is positioned in a way making it a obstruction for others.
Push the button to activate the hazard lights and push it again to deactivate them.
When activated the indicator LED will flash in sync with the wheelchair's indicators.
Lights Button*)
This button activates/deactivates the wheelchair lights. Push the button to activate
the lights and push it again to deactivate them. When the lights are activated the
light LED lights up too.
Maximum Speed Buttons
These buttons decrease/increase the maximum speed setting. In special
circumstances, the drive electronics can be programmed to use Profiles. When
Profiles are programmed, these buttons allow the user to change the profile of
the control system, instead of adjusting the maximum speed.
Seat Function Button**)
If the wheelchair is fitted with seat actuators, this button will enter and exit actua-
tor adjustment mode.
Turning Indicator Buttons*)
This buttons activates and deactivates the wheelchair's left/right indicator. Depress
the button to turn the indicator on and depress the button again to turn it off. When
activated the indicator LED will flash in sync with the wheelchair's indicators.
*)
Only on wheelchairs with lights.
**) Only on wheelchairs with electric seat functions.
33
Design and Function (VR2)