Advertisement
[Schedule] Setting for Recording Program/Event Program
Key points to remember:
1.
Setup menu can be seen only on monitor two.
2.
A day can be divided into six time zones and you can assign programs and event action programs to each time zone to
create a recording schedule.
3.
Up to four normal recording programs (REC Program) and up to four event programs (Event Program) can be created.
4.
To perform setting for REC Program, you must assign Resolution and Recording Rate. To perform setting for Event
Program, you must assign Action Mode for each event type and auto copy.
5.
You can also create special days apart from the normal schedule, and a recording program of another day of the week
can be easily switched to a special day's program automatically.
6.
Always use [SETUP/ESC] button to return to Main Menu.
7.
You can save the settings and upload them using WJ-HD300 Administration Console.
Three Steps to Create a Recording Schedule
Step 2
Create a
Timetable
Step 1
Create a REC Program/
Event Program
Step 3
Assign REC Program/
Event Program to a
Timetable
2
3
Advertisement
