Advertisement
Creating [REC Program] and [Event Program]...continued
Step 4: Use arrow buttons (
) to move cursor to MANUAL and turn it
OFF. Repeat the step for SCHEDULE.
Step 5: Use arrow buttons (
set values:
RATE = 15 ips
QUALITY = SFB
TIME = 3s
Step 6: Use arrow buttons (
Jog Dial to set values:
RATE = 60 ips
QUALITY = SFB
TIME = 20s
Step 7: Use arrow buttons (
[SET].
Step 8: Press SETUP/ESC to go to Main Menu.
Creating [REC Program] and [Event Program]...continued
Step 9: Click and move cursor to recording program. You are setting
PROGRAM 2. Press [SET]. This displays selected recording program.
Step 10: Use arrow buttons (
recording. Turn it OFF.
Step 11: Use arrow buttons (
you are using only one camera input, use Jog Dial to set recording rate
to 30 ips for the camera channel, for instance in this case,
CAM1.
p 12: Use arrow buttons (
Ste
image quality. Use Jog Dial to set image quality to SFB
(Super Fine More Motion). Use [SETUP/ESC] to return to
the Main Menu.
Step 13: Use arrow buttons (
to submenu EVENT PROGRAM from Schedule Main
Menu. You are at Event Program 1 – SETUP. Press
[SET].
) to go to PRE EVENT. Use Jog Dial to
) to move cursor to POST EVENT. Use
) to move cursor to OK and press
) to move cursor to MANUAL
) to go to SCHEDULE REC. Since
) to move to
) to take the cursor
Remember:
The maximum rate for each camera channel can
be set up to 30 ips for field resolution and the total
recording rate of the camera channels can be set
up to 60 ips for field resolution.
Be sure to disable (turn off) camera inputs that are
not required to be recorded. Default is AUTO and
no input would be recorded. Same holds true for
pre/post event and schedule program setup.
Select "OFF" for no camera input.
18
19
Recording
Program 1
Recording
Program 2
Advertisement
