Advertisement
Creating [REC Program] and [Event Program]...continued
Step 7: For CAM3, CAM4 and CAM5, use arrow buttons (
to SCHEDULE and set the values:
RATE = 10 ips
QUALITY = SFB
(Be sure to disable/turn off camera inputs that are not
required to be recorded. )
Step 8: Select submenu EVENT PROGRAM from
Schedule Main Menu. Go to EVENT PROGRAM 1.
Press [SET].
Creating [REC Program] and [Event Program]...continued
Step 9: Select VMD Setup submenu. Use Jog Dial to set Operation
mode to ACT DET (Activity Detection Mode). Use arrow
buttons (
) to move the cursor to OK and press
[SET].
Step 10: Use [SETUP/ESC] to go to EVENT on Main Menu.
Select VMD Setup Sub Menu. Press [SET]. Select ON for
CAM 1. Press [SET].
Step 11: Rotate Jog Dial until SETUP AREA is displayed in
the status area. Use arrow buttons (
cross (+) cursor to desired 'starting point'. Press [SET]. Use
arrow buttons to select area 'ending point'.
Step 12: Choose two opposite areas on the screen to
capture the image from the opposite sides of the point of
interest. Press [SET].
) to go
) to move
28
29
Advertisement
