Advertisement
Create a [Time Table] to Assign to REC Program/ Event Program
Use arrow buttons (
Step
23:
box for PERIOD 3. Rotate Jog Dial to set 'start time' as
5:00 P.M. and 'end time' as 12:00 A.M. Select OK using
arrow buttons and press SET. Press [SETUP/ESC] to go
back to Main Menu.
(For setting a schedule that encompasses 24 hours
recording program/event program, a minimum of three
time periods is required. )
Step 24: Use right arrow to go to Period 2 on the
timetable panel
which has recorded REC Program.
Move Jog Dial to select color for program 2 as Green.
(REC or Event Program 2 are always Green in color.)
Use arrow buttons to go to OK at the bottom of the
screen [SET]. Press [SETUP/ESC] to go back to Main
Menu.
You have just completed applying a daily timetable for
REC and Event program recording.
Scenario II: Multiple Inputs
Let's try doing this with multiple camera channels.
Operator B needs to set up a specific schedule for
recording a program and events with five cameras (see the
box on right for setting parameters).
) to move cursor to 'start time' input
Setting Parameters
Scheduled to Record Tuesday, Thursday,
Saturday, Sunday 6 A.M.- 8 P.M.
Five cameras
Field Resolution
Cameras One and Two:
-
Stationary cameras
-
VMD for 2 areas on opposite sides of
images
-
Pre-Event 15 ips, SFB, 4s
-
Post-Event 15 ips, SFB, 4s
-
VMD operation mode ACT DET
Cameras Three, Four, Five
-
PTZ cameras
-
10 ips, SFB
24
25
Advertisement
