Advertisement
Creating [REC Program] and [Event Program]...continued
Step 14: Select VMD under Event Program 1 and Press [SET] to enter
SETUP. Press [SET] again.
Step 15: Click on OPERATION MODE to set action. Use
Jog Dial and select ACT DET. Use arrow buttons to
move cursor to OK and press [SET]. Press [SETUP/
ESC] to go to Main Menu.
(In ACT DET, the system does not generate any "alarm"
or "buzzer" function.)
Creating [REC Program] and [Event Program]...continued
Step 16: Use arrow buttons (
Menu. Select VMD Setup submenu. Press [SET]. Use Jog Dial to
select ON for camera channel being used. (Use Jog Dial to select
OFF for remaining camera channels.) Press [SET].
Step 17: Click on selected camera channel and rotate Jog Dial until
SETUP AREA is displayed in status area.
Step 18: Use arrow buttons (
(+) to desired 'starting point'. Press [SET]. Use arrow buttons
to select desired 'ending point'. Press [SET]. (You can select
up to 4 areas this way.)
) to go to EVENT on Main
) to move cross cursor
20
21
Advertisement
