Table of Contents
Advertisement
HWNRi-300
5.4. Other advanced options
5.4.1. Assigning priority to a type of data in the event of an
overloaded network
WiFi Manager N, using the QOS (Quality of Service) function, allows you to ensure the continuity of data
streams, even on an overloaded network, by giving priority to a specific stream in relation to other data
streams. To access the QOS function:
5.4.2. Configuring the DHCP server
This chapter will explain how to configure the internal DHCP server which manages the IP addresses of your
computers.
- On the WiFi Manager N home page, click the
Expert mode button.
- In the QoS tab, click the QoS option.
- Enable the QoS function.
- If you wish, you can set an automatic uplink
speed and enter its maximum value in Kbps.
- Enter the name of the rule and the computer on
which the rule will be applied.
Or:
- Enter the IP address of the transfer server.
- Select a priority: guaranteed or maximum.
The maximum priority corresponds to the
highest level of priority. The principle consists of
using the required bandwidth for the immediate
transfer of data.
The guaranteed priority guarantees the traffic of
data according to the availability of bandwidth.
- On the WiFi Manager N home page, click the
Router's IP configuration button.
- You can modify the Router's IP address
(192.168.2.1, by default) and its subnet mask
(255.255.255.0, by default).
Be sure to make a note of this IP address.
Without it, you will not be able to reconnect to
your router.
Hercules Wireless N Router
User Manual – 63/74
Advertisement
Table of Contents
