Disabling Your Wifi Network In Wifi Manager N; Re-Enabling Your Wifi Network In Wifi Manager N - Hercules HWNRi-300 User Manual

HWNRi-300
Once you have enabled the filtering by MAC address function, only the computers and devices
appearing in this list will be authorized to connect to your Hercules router.
If your friends visit you with their WiFi computer or device, or if you wish to connect new WiFi devices,
don't forget to add their MAC address to the filtering list, or else they will never be able to connect.
To remove a WiFi computer or device (webcam, game console or other) from the
list:
- In the Remove column, click
- Confirm the removal in the dialog box which appears.
- Click the Modify button to validate your settings, or Cancel to cancel the settings you have entered.

3.6.4. Disabling your WiFi network in WiFi Manager N

If you wish to use your Hercules router as a wired router only (that is to say, connected to the computer via the
Ethernet port, and not by WiFi), you can disable your WiFi network by pressing the
router, as indicated in section 3.4.1. Disabling/re-enabling WiFi in a fraction of a second. You can also do
the same thing in WiFi Manager N.

3.6.5. Re-enabling your WiFi network in WiFi Manager N

If you wish to re-enable your WiFi network, press the
up) or proceed as follows:
- On the WiFi Manager N home page, select WiFi settings.
next to the computers or devices you wish to remove from the filtering list.
- On the home page, select WiFi settings.
- In the WiFi settings page, deselect the Enable
WiFi network box.
- Confirm that you wish to disable your WiFi
network.
button on the router again (the WiFi LED lights
Hercules Wireless N Router
button on the
User Manual – 33/74