Other Advanced Options; Configuring The Dhcp Server - Hercules Router 802.11G-54 User Manual

Hercules Router 802.11G-54
- Follow the on-screen instructions provided. Then:

5.4. Other advanced options

5.4.1. Configuring the DHCP server

This chapter will show you how to configure the internal DHCP server, which manages your computers' IP
addresses.
74/82 – User Manual
- On the WiFi Manager Home page, click the Toolbox
button.
- Select Update firmware.
- Click the Browse... button.
- Select your firmware file, then click Open.
- Click Update to import the data.
Your Hercules Router will now use this new firmware
version.
- On the Home page, click the
Advanced settings button.
- Select Router addressing.
- You can modify the IP Router
address (192.168.2.1, by default) and
its Subnet mask (255.255.255.0, by
default).
Make absolutely sure to write
down this IP address! Without it, you
will not be able to reconnect to your
router.
- If you leave the Internal DHCP server
enabled box ticked, you can modify the
Start IP address (192.168.2.2, by
default),
(192.168.2.128, by default) and the
Validity duration (60 minutes, by
default) of these addresses.
- If you tick the Internal server
disabled box, you as a user decide to
now assign the IP address for each
computer yourself.
the End IP address