Other Advanced Options; Configuring The Internal Dhcp Server - Hercules HWGEXT-54-LB Manual

Hercules HWGEXT-54-LB
To load a configuration:

4.10. Other advanced options

4.10.1. Configuring the internal DHCP server

This chapter will explain how to change your WiFi Extender's IP address and configure the internal DHCP
server, which manages the IP addresses of your computers.
To access the DHCP server configuration page:
To configure the DHCP server:
74/82 – User Manual
- On the home page, click the Toolbox button.
- Select Load/Save your settings.
- Click the Browse... button.
- Select your file (Config.bin type), then click Open.
- Click Load to import the file.
This settings file will replace the existing
configuration.
- On the home page, click the Advanced Settings
button to access the advanced settings for your WiFi
network.
- On the page displayed, click the IP addressing
button.
- You can modify the IP Address of your Hercules
WiFi Extender (192.168.1.254, by default), its
Subnet mask (255.255.255.0, by default), and
designate the gateway.
Be sure to make a note of the IP address.