Table of Contents
Advertisement
Hercules Wireless N Router
- If you select the L2TP connection type:
Once you have selected your connection mode, don't forget to click the Apply and Save button to
save your settings.
3.5.2. Testing your Internet connection
Once you have selected your Internet connection mode for your Hercules router, you can carry out a first test
and verify that you are able to access the Internet.
On the General settings page, you can also view the Earth icon
connected), or red (router not connected).
26/74 – User Manual
- Select PPTP in the drop-down list.
- Enter the host name supplied when subscribing
to the service.
- If necessary, click the Clone button to clone your
PC's MAC address.
- Enter your connection username (login) and
password.
- Also enter the PPTP gateway and, if you wish, a
connection ID for this gateway.
This information can be found in the membership
details sent to you by your ISP.
- Enter a valid MTU value.
The MTU value corresponds to the maximum
value, in bytes, of transmitted data packets (for
example, 1500 bytes on an ADSL WiFi network).
- Select L2TP in the drop-down list.
- Enter the host name supplied when subscribing
to the service.
- If necessary, click the Clone button to clone your
PC's MAC address.
- Enter your connection username (login) and
password.
- Also enter the L2TP gateway and, if you wish, a
connection ID for this gateway.
This information can be found in the membership
details sent to you by your ISP.
- Enter a valid MTU value.
The MTU value corresponds to the maximum
value, in bytes, of transmitted data packets (for
example, 1500 bytes on an ADSL WiFi network).
to see your status: green (router
HWNRi-300
Advertisement
Table of Contents
