Facilitating Connection Of Devices With The Upnp Protocol; Linking An Ip Address To A Dynamic Domain Name Server - Hercules HWNRi-300 User Manual

Hercules Wireless N Router

5.4.3. Facilitating connection of devices with the UPnP protocol

WiFi Manager N's UPnP protocol has the objective of facilitating the connection of devices on the network for
the sharing of files or of the Internet connection, for example, by carrying out an automatic identification of the
computer's components.
To enable the UPnP protocol:

5.4.4. Linking an IP address to a dynamic domain name server

Thanks to the Dynamic DNS (or DDNS) function in WiFi Manager N, your IP address is always known to your
domain name server. Simply enter the supplied password and username and the Dynamic DNS service takes
care of regularly sending your router's public IP address (that assigned to your router's Internet connection by
your service provider).
Note: You must have subscribed to a Dynamic DNS service.
64/74 – User Manual
- If you enable DHCP, you can modify the start
IP address (192.168.2.2, by default), the end IP
address (192.168.2.128, by default) and the
lease time for these addresses (Forever is the
default value).
- If you do not enable DHCP, you decide to set
the IP address for each computer yourself.
- You can assign a domain name to this server
and a specific IP address according to the
computer's MAC address.
The table displays the list of IP and MAC
addresses added.
- Click the Apply button to validate your settings.
- On the WiFi Manager N home page, click the
Expert mode button.
- Click the Universal Plug and Play option.
- Tick the Enable the UPNP function on the
router box.
- Click the Apply button to validate your choice.
HWNRi-300