Warranty; Commercial Equipment Rated 20 Tons And Larger And Related Accessories; Factory Warranty Information - Trane IntelliPak Installation, Operation And Maintenance Manual

Warranty

Commercial Equipment Rated 20 Tons and
Larger and Related Accessories
Products Covered - This warranty* is extended by
Trane Inc. and applies only to commercial
equipment rated 20 Tons and larger and related
accessories.
The Company warrants for a period of 12 months from
initial start-up or 18 months from date of shipment,
whichever is less, that the Company products covered by
this order (1) are free from defects in material and
workmanship and (2) have the capacities and ratings set
forth in the Company's catalogs and bulletins, provided
that no warranty is made against corrosion, erosion or
deterioration.The Company's obligations and liabilities
under this warranty are limited to furnishing f.o.b. factory
or warehouse at Company designated shipping point,
freight allowed to Buyer's city (or port of export for
shipment outside the conterminous United States)
replacement equipment (or at the option of the Company
parts therefore) for all Company products not conforming
to this warranty and which have been returned to the
manufacturer.The Company shall not be obligated to pay
for the cost of lost refrigerant. No liability whatever shall
attach to the Company until said products have been paid
for and then said liability shall be limited to the purchase
price of the equipment shown to be defective.
The Company makes certain further warranty protection
available on an optional extra-cost basis. Any further
warranty must be in writing, signed by an officer of the
Company.
The warranty and liability set forth herein are in lieu of all
other warranties and liabilities, whether in contract or in
negligence, express or implied, in law or in fact, including
implied warranties of merchantability and fitness for
particular use. In no event shall the Company be liable for
any incidental or consequential damages.
THE WARRANTY AND LIABILITY SET FORTH HEREIN ARE
IN LIEU OF ALL OTHER WARRANTIES AND LIABILITIES,
WHETHER IN CONTRACT OR IN NEGLIGENCE, EXPRESS
OR IMPLIED, IN LAW OR IN FACT, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
PARTICULAR USE, IN NO EVENT SHALL WARRANTOR BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
Manager - Product Service
Trane Inc., Clarksville,Tn 37040-1008
PW-215-2688
*A 10 year limited warranty is provided on optional Full
Modulation Gas Heat Exchanger.
*Optional Extended Warranties are available for
compressors and heat exchangers of Combination Gas-
Electric Air Conditioning Units.
RT-SVX36K-EN

Factory Warranty Information

Compliance with the following is required to preserve the
factory warranty:
All Unit Installations
Startup MUST be performed byTrane, or an authorized
agent ofTrane, to VALIDATE this WARRANTY. Contractor
must provide a two-week startup notification toTrane (or
an agent ofTrane specifically authorized to perform
startup).
On all IntelliPak™ I units, aTrane factory REQUIRED
startup (mandatory with Evaporative Condensing or
optionally selected ON OTHER UNITS) provides
"maximized unit reliability and overall unit performance,"
in addition to preserving the standard factory warranty.
Additional Requirements for Units Requiring
Disassembly
When a new fully assembled IntelliPak is shipped and
received from ourTrane manufacturing location, and, for
any reason, it requires disassembly or partial
disassembly-which could include but is not limited to the
evaporator, condenser, control panel, compressor/motor,
factory mounted starter or any other components
originally attached to the fully assembled unit-compliance
with the following is required to preserve the factory
warranty:
• Trane, or an agent ofTrane specifically authorized to
perform start-up and warranty ofTrane® products, will
perform or have direct on-site technical supervision of
the disassembly and reassembly work.
• The installing contractor must notifyTrane-or an agent
ofTrane specifically authorized to perform start-up and
warranty ofTrane® products-two weeks in advance of
the scheduled disassembly work to coordinate the
disassembly and reassembly work.
• Start-up must be performed byTrane or an agent of
Trane specifically authorized to perform start-up and
warranty ofTrane® products.
Trane, or an agent ofTrane specifically authorized to
perform startup and warranty ofTrane® products, will
provide qualified personnel and standard hand tools to
perform the disassembly work at a location specified by
the contractor.The contractor shall provide the rigging
equipment such as chain falls, gantries, cranes, forklifts,
etc. necessary for the disassembly and reassembly work
and the required qualified personnel to operate the
necessary rigging equipment.
187