To Convert Oven Bake Burner - Whirlpool GW397LXUQ06 Installation Instructions Manual

8=
9=
Locate the access panel at the rear of the storage drawer
compartment. Using a 1A" (6 mm) nut driver, unscrew the
2 access panel screws. Remove access panel and set aside
along with the 2 screws.
A
A. Access >anelscrews
Locate gas pressure regulator at the rear of the storage
drawer compartment.
12. Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Oven Bake Burner
1. Locate the oven orifice hood from the front of the range.
2. Using an adjustable wrench, turn the Number 49 Natural gas
oven bake burner orifice hood counterclockwise to remove.
IMPORTANT: Do not remove the gas pressure regulator.
10. Unscrew the regulator cap and remove the plastic cover.
A. Number 49 Natural gas oven bake burner orifice hood
3. Install the Number .0512 LP gas oven bake burner orifice
hood, turning it clockwise 4 or 5 turns. Do not overtighten.
A. Plastic cover
B. Regulator cap
11. Flip the regulator cap over and replace the plastic cover.
A, Black ,0512 LP orifice hood
//sB
1 @
A. Natural gas position
B. LP gas position
C. Plastic cover
13