Additional Speedometer; Permanent Display - Mercedes-Benz Coupe Operator's Manual

Displays and operation
154
the digital speedometer in the
R
the navigation instructions in the
R
menu
cruise control
R
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
INST. CLUSTER INST. CLUSTER
Press a to confirm.
X
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
function.
You will see the selected setting:
miles. miles
Press the a button to save the setting.
X
Permanent display for outside
temperature or additional speedometer
The Permanent display: Outside Permanent display: Outside
Temperature/Speedometer Temperature/Speedometer
choose whether the multifunction display
shows the outside temperature or the speed
at the bottom right. The unit used in the
additional speedometer depends on the
display unit set (
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
INST. CLUSTER INST. CLUSTER
Press the a button to confirm.
X
Press the : or 9 button to select the
X

Permanent display

Permanent display
You will see the selected setting
Dig. speedom [mph] Dig. speedom [mph]
temperature. temperature
Press the a button to save the setting.
X
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
AMG AMG menu
Navi Navi
Settings Settings
submenu.
km km
allows you to
page 153).
Y
Settings Settings
submenu.
function.
[km/h] [km/h]
or outside outside
If you have activated the
Lights Lights function and the light switch is in the
à or c position, the daytime running
lamps are switched on automatically when
the engine is running. If it is dark, the low-
beam headlamps switch on automatically.
In the dark, the following also light up:
the low-beam headlamps
R
the standing lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamps
R
Press the = or ; button on the
X
or
steering wheel to select the
menu.
Press the : or 9 button to select the
X
LIGHTS LIGHTS submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Daytime Running Lights Daytime Running Lights
You will see the selected setting:
or Disabled. Disabled
Press the a button to save the setting.
X
Setting the brightness for the display and
switches
You can use the
switches switches function to set the brightness of
the multifunction display and the switches in
the vehicle.
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
or
Light Light submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Brightness Display/Switches: Brightness Display/Switches:
function.
You see the selected setting
value of between 0 and 100.
Daytime Running Daytime Running
Settings Settings
function.
Enabled Enabled
Brightness display/ Brightness display/
Settings Settings
Level Level with a