Additional Speedometer - Mercedes-Benz B-Class Electric Drive Operator's Manual

Setting the maximum charge current
Before charging the high-voltage battery, check
the maximum permissible charge current for the
relevant power socket.
You can set a maximum charge current in the
CELL CELL menu.
It is only necessary to select the maximum
charge current if there are no charge current
settings on the charging cable.
i
The maximum charge current values in the
on-board computer may deviate from the
charging cable values.
Example: changing the charge current
Setting the maximum charge current
:
i
This menu is not available in some coun-
tries. In this case, the maximum charge cur-
rent for the power socket is limited to a fixed
level, depending on the country concerned.
Press the = or ; button on the steering
X
wheel to select the Sett. Sett.
Use 9 or : to select the
X
menu.
Press a to confirm.
X
Press 9 or : to select
X
Charge Charge Current: Current:.
Press a to confirm.
X
Press 9 or : in the submenu to select
X
desired maximum charge current :.
Press the a button on the multifunction
X
steering wheel to confirm.
The high-voltage battery is charged with the
selected maximum charge current.
Instrument cluster
Selecting the distance unit
The Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
tion allows you to choose whether certain dis-
plays appear in kilometers or miles in the mul-
tifunction display.
X
X
E- E- X
X
X
The selected unit of measurement for distance
applies to:
R
R
R
R
R
R
R
Switching the additional speedometer
on/off
If the additional speedometer is switched on,
the speed is shown in the status area of the
multifunction display instead of the outside tem-
perature.
The speed display is inverse to the speedome-
menu.
ter.
E-CELL E-CELL sub-
X
X
Maximum Maximum
X
X
X
Selecting permanent display
The
to choose whether the multifunction display
always shows the outside temperature or the
speed.
func- The speed display is inverse to the speedome-
ter.
Menus and submenus
Press the = or ; button on the steering
wheel to select the Sett. Sett.
Press the : or 9 button to select the
Instrument Cluster Instrument Cluster
Press a to confirm.
Press the : or 9 button to select the
Display Unit Speed-/Odometer Display Unit Speed-/Odometer
You will see the selected setting:
Press the a button to save the setting.
Digital speedometer in the
Odometer and the trip odometer
Trip computer
Current energy consumption and approxi-
mate range
Navigation instructions in the
Cruise control
ASSYST PLUS service interval display
Press the = or ; button on the steering
wheel to select the Sett. Sett.
Press the : or 9 button to select the
Instrument Cluster Instrument Cluster
Press a to confirm.
Press the : or 9 button to select the
Speedometer [km/h] Speedometer [km/h]
[mph] [mph] function.
You will see the selected setting:
Press the a button to save the setting.
Permanent Display: Permanent Display:
menu.
submenu.
function.
km km or miles. miles
Trip Trip menu
Navi Navi menu
menu.
submenu.
or Speedometer Speedometer
On On or Off. Off
function allows you
Z
165