Mercedes-Benz Coupe Operator's Manual page 184

Displays and operation
182
Display messages
+
Key Not Detected Key Not Detected
(white display
message)
+
Obtain a New Key Obtain a New Key
+
Key Does Not Key Does Not
Belong to Vehicle Belong to Vehicle
+
Close Doors to Close Doors to
Lock Vehicle Lock Vehicle
+
Insert Key Insert Key
+
Take Your Take Your Key Key From
Ignition Ignition
Transmission
Display messages
Apply Brake Apply Brake
to Shift from 'P' to Shift from 'P'
Apply Brake Apply Brake
and Start Engine and Start Engine
to Disengage 'P' to Disengage 'P'
Start Engine Start Engine
to Engage Gear to Engage Gear
Possible causes/consequences and M M Solutions
You are in the vehicle and the SmartKey currently cannot be
detected by the vehicle.
Change the location of the SmartKey in the vehicle.
X
If the SmartKey still cannot be detected:
Insert the SmartKey into the ignition lock and turn it to the
X
desired position (
The SmartKey needs to be replaced.
Visit a qualified specialist workshop.
X
You have put the wrong SmartKey in the ignition lock.
Use the correct SmartKey.
X
At least one door is open. A warning tone also sounds.
Close all doors and lock the vehicle again.
X
The KEYLESS-GO start function is temporarily malfunctioning or
is defective. A warning tone also sounds.
Insert the SmartKey into the ignition lock and turn it to the
X
desired position (
The SmartKey is in the ignition lock.
Remove the SmartKey.
X
From
Possible causes/consequences and M M Solutions
You have attempted to move the transmission selector lever to
position D, R or N without depressing the brake pedal.
Depress the brake pedal.
X
When the engine is switched off, it is not possible to shift out of
park position P.
Depress the brake pedal and start the engine.
X
The gear cannot be engaged when the engine is switched off.
Depress the brake pedal and start the engine.
X
page 113).
Y
page 113).
Y