Table of Contents
Advertisement
Thank you very much for choosing a Wel-Bilt™ product! For future reference, please complete
the owner's record below:
Model: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE:
This Wel-Bilt 8in. Bench Grinder is ideal for use in sharpening chisels, axes and other wood-cutting
tools. It is also useful for repairing tips on screwdrivers and drill bits or for removing excess metal
burrs from pieces of cut metal.
SPECIFICATIONS:
• Rated Voltage:
• Rated Input Power:
• Delivers:
• Wheel Size:
• Wheel Grit:
• Weight:
GENERAL SAFETY RULES
WARNING:
below may result in serious injury.
CAUTION:
they have read this manual and have developed a thorough understanding of how the Bench
Grinder works.
WARNING:
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
6in. (Item# 22481)
120 Volts, 60Hz
1/2 HP, 2.8 Amps
3450 RPM
6 x 3/4in. with 1/2in. arbor
36 and 60
22 lbs.
Read and understand all instructions. Failure to follow all instructions listed
Do not allow persons to operate or assemble this Bench Grinder until
The warnings, cautions, and instructions discussed in this instruction
SAVE THESE INSTRUCTIONS
Purchase Date: _______________
Page of 14
2
8in. (Item# 22483)
120 Volts, 60Hz
3/4 HP, 4.8 Amps
3450 RPM
8 x 1in. with 5/8in. arbor
36 and 60
35 lbs.
Advertisement
Table of Contents
