Table of Contents
Advertisement
Thank you very much for choosing a Wel-Bilt™ product! For future reference, please complete the
owner's record below:
Model: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or used
for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE:
This Angle Grinder is ideal for cutting and grinding metal, cutting masonry and rust removal.
TECHNICAL SPECIFICATIONS:
Disc diameter:
No load speed:
Input voltage:
Input current:
Spindle thread:
GENERAL SAFETY RULES
WARNING:
below may result in serious injury.
CAUTION:
have read this manual and have developed a thorough understanding of how the Angle
Grinder works.
WARNING:
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Read and understand all instructions. Failure to follow all instructions listed
Do not allow persons to operate or assemble this Angle Grinder until they
The warnings, cautions, and instructions discussed in this instruction
SAVE THESE INSTRUCTIONS
Purchase Date: _______________
4in.
11,000 RPM
120V-60Hz
4.5A
M10
Page of 11
2
Advertisement
Table of Contents
