Wel-Bilt 22481 Owner's Manual page 6

Do not overtighten spindle nuts.
Adjust tool rests whenever necessary to maintain a distance of 1/8in. from the
grinding wheel.
ASSEMBLY:
Mounting the Grinder to the Workbench
Before attempting to use this grinder, it must be properly mounted to a workbench or grinding stand.
WARNING! Bench grinders vibrate. Grinder movement during high-speed rotation may
cause injury or damage to the workpiece or operator. Mount the grinder securely to a sturdy
workbench or grinding stand.
1. Position the grinder on the workbench.
2. Mark the workbench through the two mounting holes located in the grinder base.
3. Drill holes in the workbench at the marks.
4. Using two long bolts, washers, lock-washers and nuts, as shown (not supplied), secure the
grinder to the workbench.
Eye Shield Installation
Eye shields must be installed before operating the bench grinder.
Page of 14 6