Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Wel-Bilt 21403
Summary of Contents for Wel-Bilt 21403
- Page 1 4IN. ANGLE GRINDER OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 21403...
-
Page 2: Intended Use
Thank you very much for choosing a Wel-Bilt™ product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. -
Page 3: Important Safety Considerations
IMPORTANT SAFETY CONSIDERATIONS • Stay alert, watch what you are doing and use common sense when operating the Angle Grinder. Do not use the Angle Grinder while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating the Angle Grinder may result in serious personal injury. - Page 4 • Wheels must be used only for recommended applications. For example: do not grind with the side of cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding; side forces applied to these wheels may cause them to shatter. • Always use undamaged wheel flanges that are of correct size and shape for your selected wheel.
- Page 5 You will need to select the appropriate disc depending on the type of material you are grinding. When grinding, do not force the Angle Grinder. The weight of the Angle Grinder itself should provide all the force that is required. If the tool slows significantly, lift it away from the surface to allow it to regain speed.
- Page 6 Attaching and removing the grinding disc provided 1. Inspect the grinding disc before fitting and during use to ensure it is not deformed or cracked. 2. Ensure that the guard is fitted in a position which ensures it is between you and the grinding disc.
- Page 7 7. If the outer flange is tight, depress the spindle lock button at the top of the gear box housing and rotate the spindle until it locks in position. Once the spindle is locked and cannot be rotated, use the pin wrench supplied to loosen the outer flange. Fig A 8.
-
Page 8: Operation
To reduce the risk of injury and to ensure maximum control during use, hold the tool with both hands while the tool is in operation. OPERATION: Operating the on/off switch 1. To turn the Angle Grinder on, slide the on/off switch forward to the on position”1” (Fig.X) 2. - Page 9 program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel. • When not in use the Angle Grinder should be stored in a dry, frost free location not within the reach of children. • Keep ventilation slots of the Angle Grinder clean at all times and prevent any foreign matter from entering them.
- Page 10 For replacement parts and technical questions, please call 1-800-222-5381. Page of 11...
- Page 11 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, •...