Intended Use; Technical Specifications; General Safety Rules - Wel-Bilt 24288 User Manual

Thank you very much for choosing a Wel-Bilt™ product. For future reference, please complete
the owner's record below:
Model: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This air tank is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this item not be modified and/or used
for any application other than that for which it was designed. If you have any questions relative to
a particular application, DO NOT use this product until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.

INTENDED USE

This bench grinder is designed for general metal grinding and sharpening.

TECHNICAL SPECIFICATIONS

Item# Description
6in. bench grinder
24288
with work lamp
24289 6in. bench grinder
24290 8in. bench grinder

GENERAL SAFETY RULES

WARNING!
below may result in electric shock, fire and/or serious injury.
WARNING!
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
WORK AREA
• Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents.
• Do not use your tool where there is a risk of causing a fire or an explosion; e.g. in the
presence of flammable liquids, gasses, or dust. Power tools create sparks, which may ignite the dust
or fumes.
Voltage/
Frequency
120V / 60Hz
120V / 60Hz
120V / 60Hz
Read and understand all instructions. Failure to follow all instructions listed
SAVE THESE INSTRUCTIONS
Purchase Date: _______________
Rated Running
Power
1/2 HP
1/2 HP
1/2 HP
Page of 13 2
Speed
6in. x 13/16in. x
3560 RPM
6in. x 13/16in. x
3560 RPM
8in. x 13/16in. x
3560RPM
Wheel Size
1/2in.
1/2in
5/8in.