Install The Water Inlet Hose; Select The Water Level - Haier XPB70-111S User Manual

Install the water inlet hose; Select the water level

Insert the water inlet hose into the water-filling
entrance on the control panel, then push the
water-filling jointer into the entrance on the
control panel. (To dismantle the water inlet pipe,
just push the control handle as indicated in the
figure and pull it out)
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever
to needed line.
Use the new water inlet hose provided
with the machine to connect to the
water faucet.Old hose sets should
not be reused.
Quick water-filling entrance
You can fill water into the wash tub directly
through this entrance. It can reduce the
humidity inside the control panel significantly
and prolong the operating life of the components.
Insert the water inlet hose into the water-filling
entrance, then push the water-filling jointer into
the quick water- filling entrance. (To dismantle
the water inlet pipe, just push the control handle
as indicated in the figure and pull it out)
6
Water inlet hose
Push
Control handle
Water level
indicator
Maximum
Max
about 55L
Med
Medium
about 46L
Min
Minimum
about 36L
Quick water-filling entrance
Water inlet hose
Push
Control handle
Water inlet jointer
Water inlet
Water inlet jointer
Quick water-filling entrance