Ford 2013 F-650 Owner's Manual page 47

46
How to Use the Automatic Locking Mode
How to Disengage the Automatic Locking Mode
WARNING: After any vehicle crash, the safety belt system at all
passenger seating positions must be checked by an authorized
dealer to verify that the "automatic locking retractor" feature for child
seats is still functioning properly. In addition, all safety belts should be
checked for proper function.
WARNING: Belt and retractor assembly must be replaced if the
safety belt assembly "automatic locking retractor" feature or any
other safety belt function is not operating properly when checked by an
authorized dealer. Failure to replace the belt and retractor assembly
could increase the risk of injury in crashes.
Unbuckle the combination lap and shoulder belt and allow it to retract
completely to disengage the automatic locking mode and activate the
vehicle sensitive (emergency) locking mode.
WARNING: Failure to replace the safety belt assembly under the
above conditions could result in severe personal injuries in the
event of a crash.
2013 F-650/750 (f67)
Owners Guide gf, 2nd Printing, March 2013
USA (fus)
Safety Belts
1. Buckle the combination lap and shoulder
belt.
2. Grasp the shoulder portion and pull
downward until the entire belt is pulled
out.
• Allow the belt to retract. As the belt
retracts, you will hear a clicking sound.
This indicates the safety belt is now in the
automatic locking mode.